Polytetramethylene Ether Glycol (PTMEG) 

Polytetramethylene Ether Glycol (PTMEG) 

Product introduction

PTMEG is a white waxy solid. It turns into transparent liquid when the temperature is higher than room temperature. It dissolves easily in alcohols, esters, ketones, aromatic hydrocarbons and hydrocarbon chlorides. However, it does not dissolve in water or fatty hydrocarbons. When its molecular weight increases, its solubility drops. At room temperature, PTMEG is a good absorbent of water despending on its molecular weight and maximum up to 2%. 

Product features

Product names Quality Index	PTMEG 650	PTMEG 1000	PTMEG 1800	PTMEG 2000
Molecular Weight(g/mol)	625-675	950-1050	1750-1850	1950-2050
Hydroxyl Number (mgKOH/g)	166.24-179.54	106.87-118.12	60.65-64.12	60.65-64.12
Water Content (ug/g)	≤100
Color (Pt-Co)	≤30
Acidity Value (mg/g)	≤0.05
Peroxides (wt.ug/g as H2O2)	≤5
Stability (wt.ug/g as BHT)	Consultation between Supply and Requisition Parties

   Storage and Transportation：
    PTMEG should be stored in totally closed containers sealed with dry nitrogen. The containers must be fitted with heating equipment outside or inside to keep their internal temperature at about 50℃. Frozen PTMEG can be heated at about 70℃ for 24 hours to melt. PTMEG should not be stored at 90℃ for a long time.

      In addition, it should be stored in cool, dry and well-ventilated places, and keep away from fire sources, sparks and naked flames. Due to PTMEG water absorbent and ease of oxidization, it should not be exposed to moisture or air. To avoid static electricity, its containers should be earthen during transportation.

      PTMEG becomes highly combustible at high temperature. If fire is started, one could use spray water, alcohol foam, dry chemicals products or carbon dioxide fire extinguishers to put off the fire. When loading or unloading it, one should wear gloves and safety glasses to prevent contacting with the eyes or skin.